Introduces Removal of the Isuzu LG4JJ-WE-1101 - Engine 4JJ1 Euro 4 N Series Starter Motor of one

    This article mainly introduces Removal of the Isuzu LG4JJ-WE-1101 - Engine 4JJ1 Euro 4 N Series Starter Motor

ISUZU US-IDSS Diagnostic Service Truck Diagnostic System 06.2021

Removal
1.Remove the starter ground cable.
.Remove the nut attaching the starter ground cable to remove the ground cable.
·Disconnect the front frame harness connector near the transmission control box and remove each of the clips fastening the harness.

                                            ISUZU LinkOne EPC CSS-Net 05.2020

2. Remove the harness terminal.
· Remove the magnetic switch S terminal(2
harness.
· Remove the magnetic switch B terminal(1
harness.

3.Remove the starter assembly.
· Remove the two bolts top and bottom, and remove the starter from the clutch housing.

Disassembly
1.Disconnect the lead wire at the magnetic switch.

3.Remove the torsion spring from the magnetic switch.

                              Isuzu G-IDSS Diagnostic Service System 03.2022

4.Remove the through bolt
5.Remove the screw.