This article mainly introduces Removaland Installation of the Isuzu Engine 4JJ1 Euro 4 N Series Fuel Tank Unit
ISUZU US-IDSS Diagnostic Service Truck Diagnostic System 06.2021 This article mainly introduces Removaland Installation of the Isuzu Engine 4JJ1 Euro 4 N Series Fuel Tank Unit
Removal
1. Remove the wiring connector from the fuel tank unit.
2. Remove the installation screws and remove the fuel tank unit.
NOTE: When attaching and detaching the fuel tank unit, be careful of interfering with surrounding parts and do not deform the arm, etc.
After removing the fuel tank unit, cover the tank so that foreign material does not get inside.
Inspection The fuel tank unit changes the intemal resistance by the float position(the fuel level height) and operates the fuel meter indicator.
ISUZU Worldwide Snap-on EPC 2018 Parts Catalog
1. While moving the float from "E"to "F", inspect the
2. Check that the low fuel level warning light lights up resistance value between the connector terminals when the float is at the "E"position.
results, replace the meter with a normal one.
Installation
Installation is in the reverse order of removal.
1.Install the fuel tank unit.
2.Connect the wiring connector to the fuel tank unit.
没有评论:
发表评论