How to Remove and Install an Isuzu Engine Starter

      This article mainly introduces Removaland Installation of the Isuzu Engine 4JJ1 Euro 4 N Starter Switch

                       Isuzu E-IDSS Diagnostic Service System 09.2021

Removal
1. Remove the steering cowl(1).
· Remove the screws to remove the cowl.
2. Disconnect the ignition switch connector(2).

Isuzu G-IDSS Diagnostic Service System 03.2022

Inspection Inspect the continuity between the ignition switch connector terminals.
If any abnormality is found in the inspection results, repair or replace it.

                                       ISUZU Truck Workshop Service Repair Manual

Installation Perform installation in the reverse order of the removal.