This article describes how to install the Isuzu 4JH1 engine mount (RH)
1.Installthe support rubber.
·Install the support rubber while raising the engine.
·Tighten the fixing nuts to the specified torque.
1.Installthe support rubber.
·Install the support rubber while raising the engine.
·Tighten the fixing nuts to the specified torque.
2.Install the AC generator drive belt.
Refer to "Drive Belt"in Section 6B,Engine Cooling.
3.Install the fan shroud.
·Install the fan shroud and clip the reservoir tank hose.
4.Install the cab.(Non-tilt cab model only) Refer to "FRAME AND CAB"Section 2.
5.Refill the engine coolant.
6.Connect the battery cable negative terminal.
02.2025 ISUZU US-IDSS II Truck Diagnostic System Download and Installation
List of Tightening Torques
(a) 82 N·m(8.4 kg-m/61 Ib·ft)
(b) 40N·m(4.1 kg-m/30 Ib·ft)
(c) 48 Nm(4.9 kg-m/35 Ib-ft)
09.2024 ISUZU E-IDSS Diagnostic Software Download and Installation Service
没有评论:
发表评论