How to remove ISUZU 4JH1Engine Mount (LH)

 This article describes how to install the Isuzu 4JH1 engine mount (LH)

 02.2025 ISUZU US-IDSS II Truck Diagnostic System Download and Installation

 Components

 

 

 

Legend

1.Fan   shroud                                                                         2.Support   rubber

 

 

Removal

1.Disconnect the battery cable negative terminal.

2.Drain the engine coolant.

3.Remove the cab.(Non-tilt cab model only) Refer to "FRAME AND CAB"Section 2.

4.Disconnect   the   boost   sensor   connector.(Euro4 specification)

 1.Boost sensor  connector

 5.Remve the air intake pipe and hoses.

·Remove the pipe from the bracket.

·Remove the hose from the intercooler with the pipe attached.

·Remove the hose from the intake throttle valve with the pipe attached.

 

 

     ISUZU IDSS MX2-T Diagnostic Adapter System Support G-IDSS/US-IDSS/E-IDSS（Included DHL Shipping ）

6.Remove the fan shroud.

·Remove reservoir tank hose and fan shroud.

 

 

 

 

Remove  the  support   rubber  nut  from   engine foot side.

·Remove  the  support  rubber  while   raising  the engine.

 09.2024 ISUZU E-IDSS Diagnostic Software Download and Installation Service